Home > News > Company News

Principle of UV Coating Machine

2023-10-18

The principle of UV coating machine involves the following steps:

1. Preparation: The substrate material (paper, plastic, or metal) is first printed and allowed to dry completely before it can be coated with UV coating.

2. Coating: The substrate is then fed into the UV coating machine, which applies a thin layer of UV curable coating onto the surface of the substrate material. The coating is applied using rollers or spray nozzles, depending on the design of the machine.

3. Curing: The coated substrate is then exposed to UV light, which causes the coating to cure or harden instantly. The UV light triggers a chemical reaction in the coating, which leads to cross-linking and polymerization, resulting in a hard and durable finish.

4. Finishing: Once the UV coating is cured, the coated substrate can be further processed by cutting, folding, or binding, depending on the desired final product.

UV coating machines are popular in the printing industry because they produce a high-quality and glossy finish that is resistant to scratching, fading, and water damage. They are also fast and efficient, allowing for high-volume production at a lower cost compared to traditional coating methods.

manual-uv-coating-machine_484590.webp.jpg

Previous:No News
Next:No News

Leave Your Message